- Grml - lists.mur.at

grml-tips sarge success
by Erich Minderlein 03 Dez '06

03 Dez '06

Hallo I have done two different trials today: a) first I followed grml-tips sarge, but instead of doing base-config as written down on the CDROM, I switched to use the etch sequence. I have come as far as installing a kernel, but this fails on the creation of the mkinitrd. The /dev/sda3 which is needed is not accepted as a block device. b) The trial with grml-debootstrap runs very smooth after eliminating all input errors it installed a sarge first with a kernel of sarge, which does not boot, then I changed sources list and it installed 2.6.18-grml in chroot. Now lsmod shows only a module for ipv6 . nothing else. Fine tuning is now required: fstab, modules (installation in chroot needed) and usb devices. When I have the usb HDD available, I can copy back all /etc/* which were once prepared and still do fit. regards -- Erich Minderlein <erminderlein(a)locoware.de> MARC Mannheim Rail Commerce GmbH PS American Puritan search engines do not like strong four letter words, maybe you change my xXxXxX word to something more cryptic !! Thanks .

1 0

grml-tips sarge
by Erich Minderlein 03 Dez '06

03 Dez '06

Hallo I noted now differences between grml-tips sarge and etch base-config does not show up in the install of etch. from mount ... /proc the proceeding is different and answers some questions about errors occuring in my installs. Probably something got mixed up some time ago. best regards -- Erich Minderlein <erminderlein(a)locoware.de> MARC Mannheim Rail Commerce GmbH

1 0

grml-tips sarge
by Erich Minderlein 02 Dez '06

02 Dez '06

Hallo I am very confused again : I have followed the grml-tips sarge to a 100 %, but at the step base-config I type in at "configure apt sources" ftp.de.debian.org and then a download of testing "packages.gz" follows. But it should only download stable "packages.gz". also that I put my preferences and apt.conf in the /etc/apt/ stating that only stable or sarge is preference. I eliminated the testing and unstable sources from sources.list and preferences. when I key in /debian stable it asks for stable/testing which of course does not exist. Something in the base-config secretly adds "testing" to every user input. How come ???? The system is very stiff in first downloading libc6 from testing and then the whole sarge setup is fUcKeD uP.(the only right word. ) ( that breaks about 100 packages from the bases and consequently the system is unable to downgrade again. ) I have done that now about 6 times and the result does not change. best regards. -- Erich Minderlein <erminderlein(a)locoware.de> MARC Mannheim Rail Commerce GmbH

2 1

new grml repositories
by Michael Prokop 01 Dez '06

01 Dez '06

Hoi, thanks to the great work of Alexander 'formorer' Wirt I'm proud to be able to announce a new grml repository service. What? ----- Until now we have been using http://grml.org/repos/ as the main repository for grml. But the maintainence overhead was pretty large for me. Further disadvantages have been: * no automatization * lacking possibitilies for multi-arch (i386, amd64, ppc) * splitting into stable and testing branches not present * no notification via mail on new uploads * no possibility of archiving the pool (e.g. release-based) * host could not be moved from main grml.org server due to lack of subdomain inside repos-name Formorer was so kind to set up new infrastructure and we have been busy working on feeding all the packages to the new infrastructure within the last few days. Changes ------- You should adjust your /etc/apt/sources.list. The lines containing http://grml.org/repos/ inside your /etc/apt/sources.list can be considered deprecated. Now it should contain something like: # stable grml repository: deb http://deb.grml.org/ grml-stable main deb-src http://deb.grml.org/ grml-stable main # testing/developer grml repository: # deb http://deb.grml.org/ grml-testing main # deb-src http://deb.grml.org/ grml-testing main # old (fallback) grml repository: # deb http://grml.org/repos/ ./ # deb-src http://grml.org/repos/ ./ As the name 'grml-stable' indicates that's the repository which contains packages considered as "stable" (new release, bugfixes,...). If you want to get the bleeding edge packages you can enable the grml-testing branch as well of course. You should adjust apt-preferences as well to something like: # cat /etc/apt/preferences // main grml-repository: Package: * Pin: origin deb.grml.org Pin-Priority: 996 // fallback grml-repository: Package: * Pin: origin grml.org Pin-Priority: 995 [...] If you want to be informed about new uploads you can subscribe to the grml-testing-changes mailinglist: http://ml.grml.org/list/grml-testing-changes.en.html Just send a mail to "hg-commits+subscribe (at) ml.grml.org". If you already have the package grml-etc-core on your box make sure you are using a recent version (>= 0.2.3) which provides the files /etc/apt/sources.list.grml and /etc/apt/preferences.grml containing above entries for you. grml 0.9 will be shipped with new repository enabled by default. You won't have to care about anything if using grml >= 0.9. Backwards compatible -------------------- http://grml.org/repos/ will be available for the next few weeks as well. I will upload packages to the repository until release of grml 0.9 so you should not have any hassles. The plan is to disable the old repository by begin of 2007. The packages inside the directory will stay available but the files necessary for apt-get/aptitude might be removed when we consider the repository as deprecated. (But this won't happen within just a few days so you have enough time to adjust your setups.) Problems? Questions? -------------------- Please let me know if you consider any problems with the new repository or have any questions. JFYI && regards, -mika- -- http://grml.org/ # Linux for texttool-users and sysadmins http://wiki.grml.org/ # share your knowledge http://grml.supersized.org/ # the grml development weblog #grml @ irc.freenode.org # meet us on irc

1 1

Re: grml-tips sarge
by Erich Minderlein 30 Nov '06

30 Nov '06

Hi > Message: 3 locatedb > Hm? That's just timestamp based and we won't release a new stable > release every 8 days just to supress the warning. ;) :-) > Seriously: it's just a warning message, nothing to care about on the > live-cd - everything ok. On your hd-installation run 'updatedb' to > update the locate database, but don't care about it on the live-cd. :-) what could be done on the new union fs, where you can actually overwrite a file originally located on the cdrom as I understand, when the install is done on RAM then do a nice -10 updatedb & ; /bin/zsh should not be a RAM-memory problem , locatedb is 1.5 MByte or so just service > > > > there is an output of mkfs.ext3 : > > Dateisystem wird geprft alle .., je nachdem ..., > > veraenderbar mit tune2fs -c oder -t > > must be > > veraenderbar mit tune2fs -c oder -i > > ==================================^ > > lots of downloads going on, install is fine. > > mkfs.ext3 is nothing which is controlled by grml. > You mean the output of mkfs.ext3 regarding tune2fs contains errors?! jes, just one letter -t should be -i (-c=count, -i = interval) > Just set $TERM to something like 'linux' when chrooting... thks > > perl continued to complain LANGUAGE unset, > [...] > > Just install 'locales'. > thanks, will do > > ls /dev/sd* does not show > > /dev/sda4, /dev/sda5, /dev/sda6 ! > > > I cannot mkfs.ext3 /dev/sda5/ dev/sda6 ! > > no devices. > > /dev/sda4 cannot be found not as p-partition, nor > > /dev/sda5 and /dev/sda6 as l-partition. > > For sure, because something is still accessing your disk so the > partition table can not be reread using the BLKRRPART ioctl(). Very > probably its an enabled swap partition. Take a look at output of > 'swapon -s' no output > and disable swap partitions via 'swapoff -a'. done the next time > > Message: 4 > Date: Wed, 29 Nov 2006 20:33:15 +0100 > From: Michael Prokop <mika(a)grml.org> > Subject: Re: [Grml] grml-tips sarge, addendum > To: grml(a)mur.at > Message-ID: <2006-11-29T20-29-38(a)devnull.michael-prokop.at> > Content-Type: text/plain; charset="us-ascii" > > * Erich Minderlein <erminderlein(a)locoware.de> [20061129 20:15]: > > [...] > > but what remains is the perl complaint: > > perl: warning: setting locale failed: > > falling back to default "C". > > apt-get install locales > > wget http://dufo.tugraz.at/~prokop/grml-kernel/2.6.17-grml/linux-image-2.6.17-gr… > dpkg -i linux-image-2.6.17-grml_grml.06_i386.deb will do > > BTW: You should definitely take a look at grml-debootstrap: > > http://grml.supersized.org/archives/202-grml-debootstrap-wrapper-around-deb… > will do here comes the preference file , as I have it in sarge plain, the only thing not from sarge is dokuwiki, not essential Package: * Pin: release a=stable Pin-Priority: 1001 Package: * Pin: release a=testing Pin-Priority: 101 Package: * Pin: release a=unstable Pin-Priority: 99 Package: * Pin: release a=experimental Pin-Priority: 9 // main grml-repository: Package: * Pin: origin grml.org Pin-Priority: 993 // fallback grml-repository: Package: * Pin: origin dufo.tugraz.at Pin-Priority: 992 The first part is from sarge The second from grml > "p.i.t.r.e."? pain in the rear end best regards, now reading and Continuation on Friday. -- Erich Minderlein <erminderlein(a)locoware.de> MARC Mannheim Rail Commerce GmbH

2 1

PXE-Boot and cheatcodes
by Ralf Moll 30 Nov '06

30 Nov '06

Hi, how can I use the differnt boot-cheatcodes for pxe-boots? I want especially use the "forensic" parameter. For the while I use the parameter "noswap", which should be quite the same? Can I include networkshares (smb/nfs) by adding special boot-parameters or do I have to rebuild the grml-iso? The grml-Terminal-Server cannot be used, because I have already a dhcp / tftp server running and don't wanna burning energy with another pc running 24/7. cu, ramon

2 1

grml - slow at the end of booting
by roland 30 Nov '06

30 Nov '06

Hello ! I often use grml on old machines and inside VMware virtual machines. works very well, but depending on the hardware, in the end of the boot there is a long delay between "Happy hacking!..." and a shell being opened. itÂ´s between 5-15 seconds delay, maybe i have seen even longer delays, but didn`t stop. this is somewhat annoying if you boot into grml several times a day. what is causing this delay? can we speed this up somehow ? roland

4 4

grml-tips sarge Addendum 2 preferences
by Erich Minderlein 29 Nov '06

29 Nov '06

Hello Something does not work as desired, when doing the install, apt* sees there is also testing available and starts downloading from the testing suite . Now I put /etc/apt/preferences in : sarge 1001 grml 993 grml-backup 992 testing 101 unstable 99 some files are downgraded, but libc6 is a p.i.t.r.e. preferences shall be added to the grml-tips sarge (etc) best regards -- Erich Minderlein <erminderlein(a)locoware.de> MARC Mannheim Rail Commerce GmbH

2 1

WiFi Success Stories?
by Juergen Fiedler 29 Nov '06

29 Nov '06

Does anybody here have a good USB WiFi adapter they could recommend? I would much prefer one that works without ndiswrapper and at least supports WEP. Something that 'just works'. Right now, I have a DLink DWL-122, which works fine as long as I don't enable WEP -but even the attempt to set the WEP key for the adapter gives me an error (SET failed on device wlan0 ; Operation not supported.). Many people out there seem to agree that it is just not a good and decent adapter. So, does anyone know of a better one that works OK with grml, I would appreciate any advice! Thanks, -juergen

1 0

grml-tips sarge, addendum
by Erich Minderlein 29 Nov '06

29 Nov '06

Hello What remains on error after doing mount -t proc none /proc a number of errors have disapperead, (I did mount -t proc proc /proc) such as tab completion, PATH, . but what remains is the perl complaint: perl: warning: setting locale failed: falling back to default "C". What i see in the aptitude display is the new kernel 2.6.18-grml, but I prefer due to the current impossibility of having more than three partitions still to be capable of downloading the 2.6.17-grml. (if my cdrom goes apart.) >From this I know it works. Is that possible ? Developpers need development, customers need stability. Thanks -- Erich Minderlein <erminderlein(a)locoware.de> MARC Mannheim Rail Commerce GmbH

2 1