[Grml] grml install on SD card

T o n g mlist4suntong at yahoo.com
Wed Jul 29 00:30:36 CEST 2009


On Fri, 24 Jul 2009 16:41:21 -0400, Sean Kennedy wrote:

> I have noticed that grml2hd (I use it to put grml onto a usb key) sets
> up grub (I know grub so I always chose to install it over lilo) to boot
> from the second hard drive.
> i.e. (hd1,0)
> (that is likely where it was was when the live version was run) But when
> you want to boot it, the hardware has detected it first and put it in
> the first position (hd0,0).
> If this is the case for you, you will have to muck about in the boot
> manager to resolve the problem.

If it is the case, then the best solution is 

Boot by UUID or disk label
http://xpt.sourceforge.net/techdocs/nix/disk/boot/boot03-
LinuxSpecificBooting/ar01s03.html

I.e., 

Stable root device (AKA UUID)
http://michael-prokop.at/blog/2006/08/11/stable-root-device-aka-uuid/

HTH

-- 
Tong (remove underscore(s) to reply)
  http://xpt.sourceforge.net/techdocs/
  http://xpt.sourceforge.net/tools/



More information about the Grml mailing list