[Grml] grml install on SD card

[Sean Kennedy]

I have noticed that grml2hd (I use it to put grml onto a usb key) sets up
grub (I know grub so I always chose to install it over lilo) to boot from
the second hard drive.
i.e. (hd1,0)
(that is likely where it was was when the live version was run)
But when you want to boot it, the hardware has detected it first and put it
in the first position (hd0,0).
If this is the case for you, you will have to muck about in the boot manager
to resolve the problem.

2009/7/24 wonderer <wonderer4711 at gmx.de>

> Hy,
>
> I want to do the HDInstall to a SD Card wich is inserted in a eeePC901
> SD-Card Slot.
> When I boot up from an USB-Stick with the grml Live-Image and choose
> HDInstall all seems to be Ok. But after reboot grml always failed to
> load (no OS found). I also tryed to install the bootmanager into
> partition /dev/sdd1 and MBR of /dev/sdd but no effekt. The internal SSD
> I do not want to have edited with the bootmanager. If I look on the
> SD-Card there seem to be all files.  Is there a way that this could run?
>
> best regards
> Henrik
> _______________________________________________
> Grml mailing list - Grml at mur.at
> http://lists.mur.at/mailman/listinfo/grml
> join #grml on irc.freenode.org
> grml-devel-blog: http://grml.supersized.org/
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.mur.at/pipermail/grml/attachments/20090724/c6c9ad36/attachment.htm