[Grml] grml 0.5 and WPA
Michael Prokop
mika at grml.org
Sun Dec 18 00:28:27 CET 2005
* Oliver Vecernik <ml at vecernik.at> [20051217 23:32]:
> Michael Prokop schrieb:
> > Hm, seems like the orinoco interface does not include the strings
> > 802.11, READY or ESSID, right? What does 'ifconfig eth1' (if eth1
> > matches your orinoco card) look like?
> eth1 Link encap:Ethernet HWaddr 00:02:2D:86:9B:66
> BROADCAST MULTICAST MTU:1500 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:1000
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> Interrupt:11 Base address:0x100
Upps, I meant iwconfig of course, sorry.
> > Make sure that /etc/default/wpasupplicant contains the right
> > settings like:
> > OPTIONS="-Dwext -i ath0 -c /etc/wpa_supplicant.conf"
> > Then check the setup in /etc/wpa_supplicant.conf. (Re)start
> > wpasupplicant running 'Restart wpasupplicant' and run 'dhclient
> > ath0' afterwards. And of course: Take a look at the syslog (run
> > 'tlog' to watch it).
> Restarting wpa_supplicant: Initializing interface 'ath0' conf
> '/etc/wpa_supplicant.conf' driver 'wext'
> Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
Ok.
> ctrl_interface='/var/run/wpa_supplicant'
> ctrl_interface_group=0
> eapol_version=1
> ap_scan=1
> fast_reauth=1
> Priority group 0
> id=0 ssid='vds'
> Initializing interface (2) 'ath0'
[...]
> Driver does not support WPA.
[...]
Ouch.
> Unfortunately wpa_supplicant says that operation is not supported. I
> attached my syslog for further investigations. I also set in
> /etc/modutils/options:
> options ath_pci countrycode=040
> but this didn't help either. Have you got another idea?
Are you sure that you provide the right key/passphrase?
Take a look at 'wpa_passphrase ssid1 key_foobar'.
And some more configuration examples can be found in
/usr/share/doc/wpasupplicant/examples/wpa_supplicant.conf.gz
Also give it a try with your orinoco card.
> BTW: I saved my configuration to an USB stick with save-config and this
> work quite well, but it's annoying to type `grml
> video=vesafb:ypan,1400x1050-32 at 60 lang=at myconfig=/dev/sda' all time. I
> read about bootparams directory, but I don't want to change my iso. Is
> it also possible to save the boot options to the stick for an automated
> start?
As video=... is an option for the kernel and isn't related to any
userland tools we could manage inside (a running) grml system you
would have to modify the isolinux.cfg file in boot/isolinux/, sorry.
regards,
-mika-
--
You like grml? Help us! http://grml.org/donations/
Already on the grml-user-map? http://www.frappr.com/grmlusers
grml-solutions http://solutions.grml.org/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.mur.at/pipermail/grml/attachments/20051218/26ae35b8/attachment-0001.pgp
More information about the Grml
mailing list