- Felix f_resch@rosenberger.de [20060821 09:15]:
i just bought new Hardware (asus p5b deluxe and a core2) and ran into probs when booting grml 0.8 (and gentoo 2006.0) from a (parallel attached) cdrom drive.
when booting the kernel it doesent seem to find any install sources (namely it cant detect the cdrom drive) and so drops me to the busybox
shell. [...]
Do you have any further news which could help me in investigating the problem?
regards, -mika-
Hi,
I worked around and installed gentoo via pxe :) The installation worked with 2.6.17-r5 and the kernels sata ahci driver recognizing all sata hds. Afterwards i?ve tried booting gentoo 2.6.17-r5 and -r6 and vanilla 2.6.18-rc4 ; neither could get the controller to function properly.
The JMicron controllers seem to be detected by the system, but not the attached drives... In the Bios you may set IDE or AHCI mode to either the SATA and the "PATA" controller but for me this makes no difference.
root@wood ~ # lshw -C storage *-ide description: IDE interface product: JMicron 20360/20363 AHCI Controller vendor: JMicron Technologies, Inc. physical id: 0 bus info: pci@03:00.0 version: 02 width: 32 bits clock: 33MHz capabilities: ide bus_master cap_list configuration: driver=ahci resources: ioport:bc00-bc07 ioport:b880-b883 ioport:b800-b807 ioport:b480-b483 ioport:b400-b40f iomemory:fe9fe000-fe9fffff irq:16 *-storage description: SATA controller product: 82801HB (ICH8) SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@00:1f.2 version: 02 width: 32 bits clock: 66MHz capabilities: storage ahci_1.0 bus_master cap_list configuration: driver=ahci resources: ioport:ec00-ec07 ioport:e880-e883 ioport:e800-e807 ioport:e480-e483 ioport:e400-e41f iomemory:febff800-febfffff irq:18
I found some posts concerning the problem with the ide controller. Afik it boils down to the "stupid error" alan cox made, and that the patches will be in 2.6.18 final. see http://www.knoppix.net/forum/viewtopic.php?t=25196&sid=dd496b66a9b801cd3... 36e44dea772 and http://fcp.surfsite.org/modules/newbb/viewtopic.php?topic_id=24885&forum... post_id=105517 and http://www.uwsg.iu.edu/hypermail/linux/kernel/0608.2/0688.html some technical information http://www.gatago.com/linux/kernel/14665031.html
@mika: I suppose the "internal server error" has been fixed, since the page looks to work fine from here. I hope you excuse me writing in english towards the benefit for people that dont speak german.
thanks for your interest Felix