-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Hi!
Today I installed grml 0.9 (two times) to HD with grm2hd. If I boot with the CD the autoconf detects eth0 (e1000) and eth1 (ipw3945) from my T60 laptop. After install on HD and reboot the system just recognize eth0. After rmmod ipw3945 /modprobe ipw3945 (and for some test another /etc/init.d/ipw3945d restart) I get a eth1 but with a dhclient eth1 I can?t get a IP.
While booting from the live CD I just need to wait a few sec and retry dhclient eth1 and the LED for the WLAN activity is enlighten and blinks. With boot from HD it is most time dark, just a part of second enlightent.
Oh, I use grml-network with WPA supplicant options.
Anyone has a idea? Is ipw3945 buggy?
Yes, it is a clean install, an now the (hopeful) exact steps: boot from CD: boot with standard option grml-network (enter correct SSID, standard options, WPA, enter correct Key), wait, break fist dhclient wait some sec dhclient eth1 *ipw3945 is active, WLAN LED is active and I got net access*
HD install: - -grml2hd - -chroot, install grub - -reboot - -apt-get update, apt-get upgrade (NO grml, kenrel oder ipw3945 update!) - -grml-network (same as with CD boot) - -reboot - - after boot no eth1 present - - rmmod ipw3945 - - modprobe ipw3945 - - ifconfig - no eth1 - - ifconfig eth1 - eth1 shows up with correct MAC ID, no IP - - dhclient eth1 - WLAN HD is dark, some flickering and NO IP..
MfG, Lars Schimmer - -- - ------------------------------------------------------------- TU Graz, Institut für ComputerGraphik & WissensVisualisierung Tel: +43 316 873-5405 E-Mail: l.schimmer@cgv.tugraz.at Fax: +43 316 873-5402 PGP-Key-ID: 0x4A9B1723