[Grml] fglrx victory
Martin Yazdzik
yazdzik at nyct.net
Tue Aug 29 19:16:15 CEST 2006
Dear mika and friends,
As y ou can see from the attached, I have 3d working.
I cheated - since the xorg log error was "unable to find screen" I took
my working file from grml 7 and simple copied it.
The differences are:
Working:
Section "Monitor"
Identifier "Monitor0"
# ModelName "Old Monitor (no DDC)"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old
Monitors
# HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
HorizSync 28.0 - 96.0
# VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 60.0 # Extreme conservative. Will flicker.
TFT default.
VertRefresh 50.0 - 60.0
# Need more information?
# http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
# http://en.tldp.org/HOWTO/XFree86-Video-Timings-HOWTO/
EndSection
Section "Device"
### Available Driver options are:
## sw_cursor is needed for some ati and radeon cards
# Option "sw_cursor"
# Option "hw_cursor"
# Option "NoAccel"
# Option "ShowCache"
# Option "ShadowFB"
# Option "UseFBDev"
# Option "Rotate"
## xorg + nvidia:
# Option "RenderAccel" "true"
# Option "AllowGLXWithComposite" "true"
Identifier "Card0"
# The following line is auto-generated by grml-x
Driver "fglrx"
VendorName "All"
BoardName "All"
## Workaround for drivers which send output to wrong device:
# Option "MonitorLayout" "LVDS, AUTO"
# Option "MonitorLayout" "LVDS, CRT"
# Option "MonitorLayout" "NONE, STV"
# Option "MonitorLayout" "LVDS"
## Specify BusID:
# BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 24
SubSection "Display"
Depth 1
# Modes "1024x768" "800x600" "640x480" "1600x1200"
"1280x1024" "1280x960"
EndSubSection
SubSection "Display"
Depth 4
# Modes "1024x768" "800x600" "640x480" "1600x1200"
"1280x1024" "1280x960"
EndSubSection
SubSection "Display"
Depth 8
# Modes "1024x768" "800x600" "640x480" "1600x1200"
"1280x1024" "1280x960"
EndSubSection
SubSection "Display"
Depth 15
# Modes "1024x768" "800x600" "640x480" "1600x1200"
"1280x1024" "1280x960"
EndSubSection
SubSection "Display"
Depth 16
# Modes "1024x768" "800x600" "640x480" "1600x1200"
"1280x1024" "1280x960"
EndSubSection
SubSection "Display"
Depth 24
# Modes "1920X1200" "1024x768" "800x600" "640x480"
"1600x1200" "1280x1024" "1280x960"
EndSubSection
SubSection "Display"
Depth 32
# Modes "1024x768" "800x600" "640x480" "1600x1200"
"1280x1024" "1280x960"
EndSubSection
EndSection
Non-wokring:
Section "Monitor"
Identifier "Monitor0"
# ModelName "Old Monitor (no DDC)"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old
Monitors
# HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
HorizSync 28.0 - 96.0
# VertRefresh 50.0 - 76.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 60.0 # Extreme conservative. Will flicker.
TFT default.
VertRefresh 50.0 - 60.0
# Need more information?
# http://xtiming.sourceforge.net/cgi-bin/xtiming.pl
# http://en.tldp.org/HOWTO/XFree86-Video-Timings-HOWTO/
EndSection
Section "Device"
### Available Driver options are:
## sw_cursor is needed for some ati and radeon cards
# Option "sw_cursor"
# Option "hw_cursor"
# Option "NoAccel"
# Option "ShowCache"
# Option "ShadowFB"
# Option "UseFBDev"
# Option "Rotate"
## xorg + nvidia:
# Option "RenderAccel" "true"
# Option "AllowGLXWithComposite" "true"
Identifier "Card0"
# The following line is auto-generated by grml-x
Driver "fglrx"
VendorName "All"
BoardName "All"
## Workaround for drivers which send output to wrong device:
# Option "MonitorLayout" "LVDS, AUTO"
# Option "MonitorLayout" "LVDS, CRT"
# Option "MonitorLayout" "NONE, STV"
# Option "MonitorLayout" "LVDS"
## Specify BusID:
# BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
# Modes "1920x1200"
EndSubSection
SubSection "Display"
Depth 4
# Modes "1920x1200"
EndSubSection
SubSection "Display"
Depth 8
# Modes "1920x1200"
EndSubSection
SubSection "Display"
Depth 15
# Modes "1920x1200"
EndSubSection
SubSection "Display"
Depth 16
# Modes "1920x1200"
EndSubSection
SubSection "Display"
Depth 24
# Modes "1920x1200"
EndSubSection
SubSection "Display"
Depth 32
# Modes "1920x1200"
EndSubSection
EndSection
Since the screen is correctly identified in the non-working file as
1920x1200, which is in fact the current and functioning resolution, and
the olny other difference appears to the the default bit depth, I am
perplexed.
However, there is definitely a speed improvement over 7. Also, I fixed
the time zone issue with brute force, by deleting every reference in
every /etc file I could find - works fine now....
Thus, we have linux for sysadmins and one rock ape - martin...
note also, I am using the ati 28 drivers and kernel-module.
Now, if the hsf driver works, I am in business.
Thanks for all the help, hard work, and sheer brilliance.
Gruesse aus NY,
M
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.mur.at/pipermail/grml/attachments/20060829/b7b41212/attachment-0001.htm
More information about the Grml
mailing list